HP 64782, Руководство пользователя, Страница: 375 / 554

display software_breakpoints
This command displays the currently defined software breakpoints and their
status.
If the emulation session is continued from a previous session, the listing will
include any previously defined breakpoints. The column marked "status"
shows whether the breakpoint is pending, inactivated, or unknown.
A pending breakpoint causes the processor to enter the emulation monitor
upon execution of that breakpoint. Executed breakpoints are listed as
inactivated. Entries that show an inactive status can be reactivated by
executing the
modify software_breakpoints set command.
A label column also may be displayed for addresses that correspond to a
symbol. See the
set command for details.
The parameters are as follows:
--EXPR--
An expression is a combination of numeric values, symbols, operators, and
parentheses, specifying an offset value for the breakpoint address. See the
--EXPR-- syntax diagram.
offset_by
This option allows you to offset the listed software breakpoint address value
from the actual address of the breakpoint. By subtracting the offset value
from the breakpoint address, the system can cause the listed address to
match that given in the assembler or compiler listing.
Examples display software_breakpoints
display software_breakpoints offset_by 1000H
See Also The
copy software_breakpoints
,
modify software_breakpoints
, and
set
commands.
Emulator/Analyzer Interface Commands
display software_breakpoints
374