22
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(55)SE and Later
OL-22861-04
Resolved Caveats
The workaround is to downgrade to 12.2(52)SE
•
CSCte99016
When two blade switches in a blade server are running Cisco IOS release 12.2(53)SE, with no stack
cable connection between them, if you enter the
no shutdown
interface command on gigabitethernet
ports 1/0/17 and 1/0/18, the output of the
show running-config
or
show interface
privileged EXEC
command shows the ports to be down.
The workaround is to downgrade the software to Cisco IOS Release 12.2(52)SE.
•
CSCte94620
After you apply an ACL, these messages appear:
%IPACCESS-4-INVALIDACL: Invalid ACL field: Acl number is 0
%IPACCESS-4-INVALIDACL: Invalid ACL field: Acl type is 145
There is no workaround.
•
CSCte99650
A switch can report abnormal temperatures even though the output of the
show environment all
user EXEC or privileged EXEC command shows that the temperatures are within acceptable limits.
This is an example of the system messages:
Dec 25 19:03:57.463 AEST: %PLATFORM_ENV-1-TEMP: Abnormal temperature detected
Jan 2 04:04:46.600 AEST: %PLATFORM_ENV-1-TEMP: Abnormal temperature detected
Jan 7 06:33:36.067 AEST: %PLATFORM_ENV-1-TEMP: Abnormal temperature detected
This is an example of the output of the
show environment all
command:
switch#
show environment all
TEMPERATURE is OK
Temperature Value: 39 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 80 Degree Celsius
Red Threshold : 90 Degree Celsius
There is no workaround.
•
CSCtf19991
If the RADIUS authentication server is unavailable and inaccessible authentication bypass is
enabled, the switch grants the client access to the network by putting the connected port in the
critical-authentication state in the RADIUS-configured or the user-specified access VLAN. After
the server is available, the client is not reinitialized and moved out of the critical VLAN.
There is no workaround.
•
CSCtf33948
A PC in 802.1x or multidomain authentication (MDA) mode is connected to an IP phone and
connected to a MDA-enabled switch port. After the PC and phone are authenticated on the port, the
PC is down. The port does not automatically reauthenticate the PC.
There is no workaround.
