34
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(55)SE and Later
OL-22861-04
Related Documentation
This information in the
Cisco Catalyst Blade Switch 3020 for HP Getting Started Guide
has been
updated:
When you launch Express Setup, you are prompted for the switch password. Enter the default password,
cisco
. The switch ignores text in the username field. Before you complete and exit Express Setup, you
must change the password from the default password,
cisco
.
Related Documentation
These documents provide complete information about the Cisco Catalyst Blade Switch 3020 for HP and
are available at Cisco.com:
http://www.cisco.com/en/US/products/ps8743/tsd_products_support_series_home.html
These documents provide complete information about the Cisco Catalyst Blade Switch 3020 for HP:
•
Cisco Catalyst Blade Switch 3020 for HP Getting Started Guide
•
Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch 3020 for HP
•
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
•
Cisco Catalyst Blade Switch 3020 for HP Command Reference
•
Cisco Catalyst Blade Switch 3020 for HP System Message Guide
Obtaining Documentation, Obtaining Support, and Security
Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback,
security guidelines, and also recommended aliases and general Cisco documents, see the monthly
What’s New in Cisco Product Documentation
, which also lists all new and revised Cisco technical
documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of
Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks
. Third-party trademarks mentioned are the property of their respective owners. The
use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and
coincidental.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
4
Mode button
10
Gigabit Ethernet ports LEDs for ports 17x to 24x
5
Console port
11
Gigabit Ethernet ports 17x to 24x
6
UID
1
LED
1. UID: unit identifier.
