10.
Lift the interior side of the system board up (1), and then remove the system board from the computer
(2)
Reverse this procedure to install the system board. Run the camera function test after the repair. For more
information, see
Basic camera function test on page 30
.
Solid-state drive
To remove the solid-state drive, use this procedure and illustration.
Table 5-11
Solid-state drive description and part number
Description
Spare part number
256 GB
M11042-007
128 GB
M11040-007
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 29
).
2.
Remove the display assembly (see
).
3.
Disconnect the battery cable from the system board (see
).
4.
Remove the system board (see
).
Remove the solid-state drive:
▲
From the removed system board, pull the drive away from the socket to remove it.
42
Chapter 5 Removal and replacement procedures for authorized service provider parts
Содержание 11-be0 Series
Страница 4: ...iv Safety warning notice ...
