HP 11-be0 Series, Руководство по техническому обслуживанию и ремонту

Страница: 47 / 72

Table 5-9 WLAN antennas description and part number
Description Spare part number
WLAN antennas M93511-001
Antenna adhesive M98505-001
1. Prepare the computer for disassembly (see Preparation for disassembly on page 29 ).
2. Remove the display assembly (see Display assembly on page 30 ).
3. Disconnect the battery cable from the system board (see Battery on page 44 ).
Remove the WLAN antennas and cables:
1. Disconnect the antenna cables from the system board (1).
2. Peel the antennas off the heat sink and battery (2).
3. Remove the antennas and cables from the computer (3).
To replace the WLAN antennas, reverse the removal procedures. Run the camera function test after the repair.
For more information, see Basic camera function test on page 30 .
System board
To remove the system board, use these procedures and illustrations.
Table 5-10 System board descriptions and part numbers
Description Spare part number
System board with 8 GB of system memory (includes processor) M93505-601
System board with 4 GB of system memory (includes processor) M93504-601
SD card holder M93503-001
System board support kit M98016-888
Component replacement procedures 39