HP 11-be0 Series, Руководство по техническому обслуживанию и ремонту

Страница: 41 / 72

Table 5-3 Touch control board and cable descriptions and part numbers
Description Spare part number
Touch control board M93498-001
Touch control board cable M93497-001
1. Prepare the computer for disassembly (see Preparation for disassembly on page 29 ).
2. Remove the display assembly (see Display assembly on page 30 ).
Remove the touch control board:
1. Position the display panel upside down.
2. Disconnect the touch cable from the ZIF connector on the touch control board (1).
3. Disconnect the two thick ribbon cables from the reverse ZIF connectors on the board (2).
4. Use a tool to release the board from the display (3). The board is secured with adhesive.
To replace the touch control board, reverse the removal procedures. Run the camera function test after the
repair. For more information, see Basic camera function test on page 30 .
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-4 Speaker description and part number
Description Spare part number
Speaker Kit M93499-001
Before removing the speakers, follow these steps:
Component replacement procedures 33