HP Enterprise ProLiant DL20 Gen9, Руководство пользователя

Страница: 78 / 124

16. Employ best practices to route and manage the power cords and other cables in the server rear panel.
IMPORTANT:
When using cable management arm components, be sure to leave enough slack in each of the
cables to prevent damage to the cables when the server is extended from the rack.
17. If removed, install the Smart Storage Battery holders .
18. If removed, install the Smart Storage Battery and connect the cable to the system board .
19. Install the air baffle .
20. Install the access panel .
21. Do one of the following:
• Slide the server into the rack.
•
Install the server into the rack .
22. Connect each power cord to the server.
23. Connect each power cord to the power source.
24. Power up the server .
25. If removed, install the security bezel .
Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the
Hewlett Packard Enterprise website .
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections in the following chapter:
• Installing the Trusted Platform Module board.
• Retaining the recovery key/password.
• Enabling the Trusted Platform Module.
Enabling the TPM requires accessing the BIOS/Platform Configuration (RBSU) in the UEFI System
Utilities.
TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the
Microsoft website .
78 Trusted Platform Module option