Hoyt RECURVE Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 32

Hoyt RECURVE Скачать руководство пользователя страница 6

6

This manual contains several safety warnings and instructions
preceded with WARNING ,

CAUTION or NOTICE.

These signal words are designed to draw attention to impor-
tant safety information. WARNING indicates a hazardous

situation which, if not avoided, could result in death or serious
personal injury. CAUTION indicates a hazardous situation,

which, if not avoided, could result in moderate or minor per-

sonal injury. NOTICE addresses safety practices not related

to personal injury.

WARNING

READ THIS MANUAL CAREFULLY BEFORE

HANDLING OR USING YOUR HOYT BOW. YOU ARE

RESPONSIBLE FOR ARCHERY SAFETY. Read and

follow all warnings and guidelines for safe operating

parameters at www.hoyt.com/safetyandwarnings

The warnings contained within this owner’s manual were cur-

rent at time of printing. For the most up to date list of warn-

ings please visit www.hoyt.com/safetyandwarnings

WARNING: Always read the warning labels and manu-

facturer’s instructions of all products being used in conjunc-

tion with a Hoyt bow, including but not limited to all archery

accessories and components directly attached to the bow

or used in conjunction with the bow such as targets, arrows,

broadheads, release aids, etc.

WARNING: It is critical that your bow is set up and func-

tioning within the bow’s required safe operating parameters

prior to use. Hoyt recommends that only a Genuine Hoyt Re-

tailer setup and inspect your archery equipment to ensure

that it is set up within the bow’s safe operating parameters.

(see page 10 for definition of Hoyt Bow Safe Operating Pa-

rameters).

«
...
4
5
6
7
8
...
»

Содержание RECURVE

































Отзывы:

Нет отзывов