Hoyt RECURVE Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 32

Hoyt RECURVE Скачать руководство пользователя страница 24

24

bow weight. Turn it counter-clockwise to decrease bow weight.

4. Using both Allen wrenches, and holding the tiller bolt in

place, re-lock the tiller bolt locking

screw.

5. Restring the bow using an appropri-

ate recurve bow stringer (See page

15).

Note: From the bottomed out position,

the tiller bolt should only be backed out

to a maximum of six complete turns. If

tiller bolt is backed out more than six

turns damage to the bow or limbs may

occur and warranty will be voided.

ADJUSTING TILLER

WARNING: Never loosen your limb weight adjustment

bolts (Tiller Bolts) more than 6 turns from the bottomed-out

position as it could cause the bow to violently disassemble

Tiller is a measurement which indicates the weight relationship

of the top and bottom limb. This static measurement effects

bow reaction and aiming. It is easily measured by noting the

difference between the top limb butt to the string, and the bot-

tom limb butt and the string. The difference (if any) is the tiller.

The degree of desirable tiller will vary from archer to archer,

depending upon factors such as grip pressure, finger pres-

sure, desired tuning pattern, desired aiming arc, desired bow

reaction and more. As a starting point, it is usually easiest to

tune a bow with 0 to 3/8” of tiller (distance from bottom limb

to string is equal to that of the top limb, or less, by up to 3/8”).

Typically, for most shooters with normal finger and hand pres-

«
...
22
23
24
25
26
...
»

Содержание RECURVE

































Отзывы:

Нет отзывов