manualshive.com logo in svg

Hoyt RECURVE, Руководство пользователя, Страница: 28 / 32

Поделиться
Скачать
Hoyt RECURVE Скачать руководство пользователя страница 28

28

Limbs, will be free from defects in materials and workmanship 

for one year from date of purchase. Hoyt Recurve Bow Riser 

and Hoyt Recurve Limb warranty is regulated under the fol-

lowing terms and conditions:

1. The original owner must retain and provide an original and 

dated proof of purchase (sales receipt). THIS WARRANTY IS 

NOT TRANSFERABLE.

2. All risers and limbs must have the original serial number 

factory-attached to the bow. The serial number must remain 

legible. 

Exclusions from Warranty Coverage.

This Limited Lifetime Warranty covers normal use of the prod-

uct, and Hoyt does not warrant and is not responsible for:

1. The use of aftermarket products/accessories that alter 

Hoyt’s specifications or design.

2. Damage to strings, damping materials, finish (including 

paint, anodize, powder coat and film-dipped finishes) resulting 

from normal wear-and tear.

3. If bow shows sign of misuse, alteration, or mishandling, this 

warranty will be void.

4. Use of arrows weighing less than 5 grains per pound of 

draw weight will void the warranty.

5. Damage to ‘other’ accessories.

OBTAINING WARRANTY SERVICE

To obtain warranty service, you must return your bow to a 

Genuine Hoyt Retailer. The dealer can help to determine if 

Hoyt factory service is required or if the dealer can complete 

the repair. Genuine Hoyt Retailers may provide additional 

services and apply additional charges for service work per-

formed by the dealer. If the bow must be returned to the 

factory, THE BOW OWNER IS RESPONSIBLE FOR THE 

FREIGHT CHARGES TO HOYT. Hoyt, in turn, will pay for 

the same return freight of the repaired product. Before any 

Содержание RECURVE

































Отзывы:

Нет отзывов