24
Chapter 6
Main keys
Rev. 1.00.05
Subject to technical changes
6.2
Boost
Description
In Boost mode, the setpoint values are increased e.g. to heat nozzles for a short time
after downtimes and to guarantee a smooth production start.
How it works
The Boost mode can be used in two situations.
In the first case the Boost mode is started during operation at the push of the button.
The setpoint values of the zones are increased by a freely selectable temperature
value. Additionally a time period can be set, after which the Boost mode is
automatically ended, otherwise the Boost mode is ended per push of the button.
The function can also be activated by a digital input e.g. from the injection molding
machine.
In the second case the Boost mode follows the heating-up. After the start-up time has
elapsed, the zones are increased by a freely selectable temperature value. This
workflow provides the operator at automated heating-up processes, because no
manual interaction is necessary.
What good is it
The Boost mode provides the operator at start-up and production start and is labor-
saving.
Setting by
[P008]Boost setpoint value (page 191)
[P017]Boost time at start-up mode (page 191)
For further details on parameters ([P***], [SP**], [CP**]) see Manual Parameters
hot-
control cDT+
.
Whether and which keys are activated
for the user, see chapter
Press key
Содержание hotcontrol cDT+
Страница 2: ......
Страница 180: ...178 Chapter 17 Technical Data Rev 1 00 05 Subject to technical changes 17 1 hotcontrol cDT ...
