hotset hotcontrol cDT+, Руководство по запуску, обслуживанию и эксплуатации

Страница: 12 / 200

10
Chapter 3
Security References
Rev. 1.00.05
Subject to technical changes
3.4 Warranty Conditions
This product is subject to the legal warranty time periods for faults or deficiencies in manufacture.
Content of Warranty
If a malfunction relatively occurs through the manufacture, the manufacturer/supplier repairs or replaces the non-
conforming product, according to their own discretion.
The following repairs do not fall under the warranty and are liable to costs:

Malfunctions after the legal notice periods have expired.

Malfunctions caused through operating error and/or incorrect parameterization of the user (if the device is not
operated as described in the start-up, service and operation manual).

Malfunctions caused through other devices.

Changes or damage to the device which do not originate from the manufacturer/supplier.
If you wish to use services within the framework of this guarantee, please refer to the manufacturer/supplier.
3.5 Transport and Storage
3.5.1 Transport
The hot runner controller hotcontrol cDT+ (all single components together) is packed in a stable shock proofed
carton. This assures sufficient protection in normal case.
3.5.2 Unpacking
Check the packaging and then the device for identifiable damage incurred during transit. If damage is identified,
then please get in touch with the transportation company.
3.5.3 Storage
If you should not put the device into operation immediately, store it protected against dirt and moisture. Permissible
temperature -20…70°C, average permissible humidity < 95 % per year, no condensation.
3.6 Lift and carry
The desktop housing device is to be carried by the handles provided, which are mounted on the two side parts.
3.7 Disposal
A manufacturer within the meaning of ElektroG (Electrical and Electronic Equipment), which implements the Eu-
ropean WEEE directive 2002/96/EC in German law, is registered under number WEEE registration number DE
64958116 . The components of this device are considered here too.
To avoid damage, the hot runner controllers must be transported STANDING .
In the case of damage the device may not be brought into operation.