Hotset GmbH
61
Start-up-, Service- and Operation Manual hotcontrol cDT+
Rev. 1.00.05
Subject to technical changes
10 Function keys
10.1 Program
Description
A program means a data set with all parameters of all zones of a
hotcontrol cDT+
hot runner controller.
Programs can be stored (internal: 10; on USB stick dependent on storage capacity),
activated, deleted, exported from internal storage and imported from USB stick.
Is a tool coding available for the tool, a coding information is sent to
hotcontrol cDT+
)
by the maximal 8 digital inputs (only for Option tool coding in
hotcontrol cDT+
) on
plug. The program allows allocation between tool coding and program.
How it works
For the
hotcontrol cDT+
hot runner controllers programs can be saved with freely
selectable name internal or to the USB stick connected to the USB port. The freely
naming of the programs, eases the recognition by the user.
What good is it
The programs support the user at adjustment caused by often tool replacement and
reduce the start-up phase.
Setting by
Function keys (page 18) Program
Whether and which keys are activated
for the user, see chapter
Select function
Is no USB stick connected, only the internal storage is active.
Create a new program (inter-
nal, as seen in the example
here, or to USB).
Press key
The system assigns the name PROGRAM, as default, that can be changed by the us-
er.
A program is stored internal in the system, when there is no USB stick connected.
Содержание hotcontrol cDT+
Страница 2: ......
Страница 180: ...178 Chapter 17 Technical Data Rev 1 00 05 Subject to technical changes 17 1 hotcontrol cDT ...
