Polaris Beer Superchiller™
230V / 50Hz
lancerbeverage.com
Page 6 of 23
Hoshizaki Lancer reserve the right to change specifications without notice.
Part No: 68000200
Images are for illustration purposes only as product may vary.
013a – 25 November 2013
Warning
ALL WIRING AND PLUMBING MUST CONFORM TO LOCAL
AND NATIONAL CODES.
Warning
CHILLER MUST BE ISOLATED FROM ELECTRICAL SUPPLY
BEFORE COMMENCING ANY SERVICE OR MAINTENANCE
WORK.
6. Installation
Warning
To avoid personal injury or damage, do not attempt to lift a
Chiller without help. Use of a mechanical lift is recommended.
6.1 Receiving
Each unit is completely tested under operating conditions and thoroughly inspected before shipment.
At time of shipment, the carrier accepts the unit and any claim for damage(s) must be made with the
carrier. Upon receiving units from the delivering carrier, carefully inspect shipping crate for visible
indication(s) of damage. If damage exists, have carrier note damage on bill of landing and file a claim
with the carrier.
6.2
Unpacking
Caution
The use of gloves is recommended to protect hands from
potential injury from sharp edges. The Chiller must always be
handled in a vertical position.
Carefully unpack the Lancer Polaris Chiller from the shipping carton, remove the wooden base.
If appropriate, assemble legs to unit by carefully tilting (tilt should not be more than 45°).
Inspect unit for concealed damage and if evident, notify delivering carrier and file a claim against the
carrier.
6.3
Selecting a Location
Warning
Chillers are intended for indoor operation only; do not
operate outside unless suitably protected by a
weatherproof enclosure.
This appliance is not suitable for installation in an area
where a water jet could be used.
