Hoshizaki Lancer Polaris Beer Superchiller, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 23

Polaris Beer Superchiller™ 230V / 50Hz
lancerbeverage.com
Page 23 of 23
Hoshizaki Lancer reserve the right to change specifications without notice. Part No: 68000200
Images are for illustration purposes only as product may vary. 013a – 25 November 2013
16. Manufacturer’s Checklist
Checked by ................................................................................. Date .............................................................
Gas Charge .......................................................... Icebank Probe fitted ........................................................
Electrically tested by ................................................. Refrigeration tested by .................................................
TAG No. ............................................................
High temperature probe located on liquid line between coil and receiver / dryer
Compressor wiring connections label affixed, wiring checked and label signed
Refrigeration system final check. Ensure evaporator fully frosts.
Check all tube work for rubbing e.g. discharge line, liquid line, TX capillary.
Condenser not touching divider panel or grille.
Agitator blades tight and not touching coils cradle.
Overflow pipe correct height and positioned straight.
All motors and pumps secured and mounted correctly.
Check icebank and temp probe position and tightness.
Coils in cradle correctly and spaced.
Chiller sticker correctly positioned and straight.
Attention sticker fitted and correctly positioned.
Clean exterior of unit including power cords.
Warning sticker applied
Check air filters are insulated
Check body for sharp edges.
Check lid for cleanliness and rough edges. Fit and secure.
Copy checklist & file, put manual/checklist in plastic bag & place in the tank area.
Customer asset No.
W/O ....................................................................
Affix label here