![background image](http://html.mh-extra.com/html/carrier/hs070-160/hs070-160_troubleshooting-manual_2562211001.webp)
HEATING
COOLING
Flotronic Plus Reciprocating Liquid Chillers
Controls Troubleshooting Guide
Model E Units Have Microprocessor Controls
and Electronic Expansion Valves
CONTENTS
SAFETY CONSIDERATIONS
Page
S A F E T Y
. . . . . . . . . . . . . . . .
1
FLOTRONIC PLUS CONTROL SYSTEM . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
.
PROCESSOR MODULE . . . . . . . . . . . . . . . . . . .
2
l
LOW-VOLTAGE RELAY MODULE . . . . . . . . .
2
. EXV
EXPANSION
VALVE) DRIVER MODULE . . . . . . . . . . . . . . .
2
.
KEYBOARD AND DISPLAY MODULE . . . . . 2
.
ELECTRONIC EXPANSION VALVE . . . . . . . . 3
l
THERMISTORS . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
.
CONTROL . . . . . . . . . . . . . . . . . . . .
3
CONTROL SEQUENCE . . . . . . . . . . . . . . . . . . . . .
Off Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Capacity Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
l
SEQUENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Unit Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Complete Unit Stoppage . . . . . . . . . . . . . . . . . . . . .
5
Single-Circuit Stoppage . . . . . . . . . . . . . . . . . . . . .
5
Lag Compressor Stoppage . . . . . . . . . . . . . . . . . . .
5
Restart Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
l
GENERAL POWER
. . . . . . . . . . . . . .
5
l
BLOWN FUSE
POWER FEED
DISCONNECT . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
l
LOW WATER TEMPERATURE
CUTOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
l
AUXILIARY INTERLOCK . . . . . . . . . . . . . . . . .
5
l
OPEN CONTROL
FUSE . . . . . . . . . .
5
.
FREEZE PROTECTION . . . . . . . . . . . . . . . . . . . .
5
HIGH-PRESSURE SWITCH . . . . . . . . . . . . . . . .
5
l
LOSS OF CHARGE SWITCH . . . . . . . . . . . . . . .
5
. COMPRESSOR DISCHARGE
TEMPERATURE SWITCH . . . . . . . . . . . . . . . . .
5
.
OIL SAFETY SWITCH . . . . . . . . . . . . . . . . . . . . .
5
CONTROLS OPERATION . . . . . . . . . . . . . . . . . .
I
Accessing Functions and Subfunctions. . . . . . . 5
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
SUMMARY DISPLAY . . . . . . . . . . . . . . . . . . . . .
5
.
STATUS FUNCTION . . . . . . . . . . . . . . . . . . . . . .
5
.
TEST FUNCTION . . . . . . . . . . . . . . . . . . . . . . . .
10
Programming Functions . . . . . . . . . . . . . . . . . . . .
1
.
FUNCTION . . . . . . . . . . . . . . . . . . . .
11
l
SET POINT FUNCTION . . . . . . . . . . . . . . . . . .
l
SCHEDULE FUNCTION . . . . . . . . . . . . . . . . . .
11
TROUBLESHOOTING
. . . . . . . . . . . . . . . . . . . . .
12-26
Checking Display Codes . . . . . . . . . . . . . . . . . . . .
1 2
l
OPERATING MODE CODES . . . . . . . . . . . . . .
12
.
ALARM CODES . . . . . . . . . . . . . . . . . . . . . . . . .
12
Quick Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 4
Electronic Expansion Valves . . . . . . . . . . . . . . . .
1 9
l
CHECKOUT PROCEDURE . . . . . . . . . . . . . . .
19
l
EXV OPERATION . . . . . . . . . . . . . . . . . . . . . . . .
21
Thermistors
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 2
l
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22
l
SENSOR REPLACEMENT . . . . . . . . . . . . . . . .
22
Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 3
Installation, start-up and servicing of this equipment
can be hazardous due to system pressures, electrical
components and equipment location.
Only trained, qualified installers and service mechanics
should install, start-up and service this equipment.
When working on the equipment, observe precautions
in the literature, tags, stickers and labels attached to the
equipment and any
safety precautions that apply.
l
Follow all safety codes.
Wear safety glasses and
gloves.
l
Use care in handling, rigging and setting bulky
equipment.
l
Use care in handling
components.
SHOCK
HAZARD.
Open all remote disconnects before
this equipment.
This unit uses a
electronic
control system.
not use jumpers or other tools
to short out components, bypass or otherwise depart
from
p r o c e d u r e s . A n y
ground of the control
or accompanying wiring
may destroy the electronic modules or electrical
component.
FLOTRONIC PLUS CONTROL SYSTEM
General
T h e
Flotronic Plus chillers
feature microprocessor-based electronic controls and an
electronic expansion valve (EXV) in each refrigeration
circuit.
The Flotronic Plus control system cycles compressors
and compressor unloaders to maintain the selected leav-
ing water temperature set point. It automatically posi-
tions the EXV to maintain the specified refrigerant
superheat entering the cylinders of the compressor.
Safeties are continuously monitored to prevent the unit
from operating under unsafe conditions. A scheduling
function, programmed
by
the user, controls the unit
occupied/ unoccupied schedule. The control also operates
a Quick Test program that allows the operator to check
input and output signals to the microprocessor.
The control system consists of a processor module
(PSIO), low-voltage relay module (DSIO), electronic
expansion valve (EXV), EXV driver module (DSIO),
keyboard and display module (HSIO) and thermistors to
provide analog inputs to the microprocessor. The soft-
ware resides in the PSIO.
Содержание HS070-160
Страница 27: ......