horsch Transformer 12 VF, Руководство по эксплуатации

Страница: 44 / 136

44 60043599 • 02 • 03/2021 • en
7 Assembly groups
7.1 Parallelogram
The parallelograms with the cultivation tools are attached to the frame by means of
clamping plates over the entire machine width.
The working depth is set via the depth guide wheels on the parallelograms.
1
2
3
4
Parallelogram
1 Clamping plate
2 Depth guiding wheel
3 Tines
4 Lever for depth setting
7.2 Working depth
CAUTION
Risk of crushing in the adjustment area of the lever.
Ø
Never reach into the crushing area!
1. Set the working depth of the parallelograms by means of the levers.
To do so, pull the spring-loaded bolt to unlock the lever and let it engage in
the desired position.
The further the lever is moved to the front the deeper the tools work.
The further the lever is moved to the back the shallower the tools work.
2. The working depth can be adjusted between 0 and 7 cm, depending on the
soil conditions.
3. Check the exact working depth in the field!
4. Adjust the working depth identically on each parallelogram; observe the at-
tached scale.