horsch Transformer 12 VF, Руководство по эксплуатации

Страница: 114 / 136

28 | Section settings
114 60043599 • 02 • 03/2021 • en
28.3 Section width settings screen
Section width – the boom is displayed in the header
Ø Press a button (section).
ð
An input window opens in which the section width in cm can be entered. For
grouped sections, a width can be entered for each individual section. If a sec-
tion is to have the working width 0, the section must be configured first. Oth-
erwise, the section width can be selected as desired within the framework of
the machine's actual width.
The grey boxes above the row numbers indicate which sections are grouped or
which sections consist of several rows. Grouped sections are indicated by a check
mark between the boxes.
When returning to the device geometry screen, a pop-up message appears inform-
ing about the changes made.
The changes are accepted when confirming the message and a restart is performed.
Discarding the changes will return the user to the previous screen.
Note:
following changes were made:
sections grouped
working width changed
rows deactivated
Check valve position
,
When confirming the change a restart is performed.
Accept
Discard