horsch Transformer 12 VF Скачать руководство пользователя страница 41

Страница: 41 / 136

Operation | 6

60043599 • 02 • 03/2021 • en

6.2.3 Parking

DANGER

Serious accidents from loss of stability!

Park the machine only on a level and firm ground.

Secure the machine against rolling away before unhitching.

NOTE

Clean the machine and prepare properly before parking it for an extended
period; see chapter

Care and Maintenance.

The machine can be parked in folded or unfolded condition.

1. Move the supports from the transport to the parking position.

Loosen the cotter pin and remove the bolt. Move the support to the parking
position, reinsert the bolt and secure the bolt with the cotter pin.

DANGER

Danger of serious accidents when repositioning the supports.

Shut down the tractor and secure it against reactivation.

Never move under the machine without suitable supports.

Do not reach into the holes when repositioning.

Never stay in the area under the support. The support may fall down and
cause serious or even fatal physical injuries.

Supports in transport position

Содержание Transformer 12 VF









































































































































Результаты поиска

Содержание Transformer 12 VF

Отзывы:

Похожие инструкции для Transformer 12 VF

Бренды по названию

Популярные бренды

horsch Transformer 12 VF, Руководство по эксплуатации

Результаты поиска

Содержание Transformer 12 VF

Отзывы:

Похожие инструкции для Transformer 12 VF

Бренды по названию

Популярные бренды