horsch LEEB 12 TD Скачать руководство пользователя страница 59

Страница: 59 / 181

Dome

DANGER

Danger of injury by poisonous vapours! Do

not climb into the spraying mixture container!

The dome screen is located on the front solution

tank. An entry opening is located on the second

solution tank.

NOTE

The dome screen must be checked daily and

cleaned as necessary!

Filling dome

Dome screen

Hand washing tank

NOTE

Fill only clean water into the hand washing

tank!

WARNING

Danger or poisoning by contaminated water

in the hand washing tank!

Never use the water in the hand washing tank

as drinking water!

Hand washing tank

The hand washing tank with drain valve is

located at the right hand side next to the

illuviation valve.

A soap dispenser for hand cleaning is located to

the right of the hand washing tank in the stowage

compartment.

Soap dispenser

Содержание LEEB 12 TD






















































































































































































Результаты поиска

Содержание LEEB 12 TD

Отзывы:

horsch LEEB 12 TD, Руководство по эксплуатации, Страница: 59 / 181

Результаты поиска

Содержание LEEB 12 TD

Отзывы: