horiba d-51, Инструкция по эксплуатации

Страница: 38 / 91

3 Functions
3.1 Data memory function
D-51 29
3
Functions
This chapter describes the various functions of the pH
meter.
3.1
Data memory function
●
Data memory
In all measurement modes, you can store data when the
instantaneous value is measured or the measured value
is held (HOLD status) during the Auto HOLD
measurement by pressing the
▲
key.
The measurement reading is stored along with the
temperature, data, HOLD value/instantaneous value,
ATC/MTC and calibration point , at the time the mea-
surement was taken.
After the data number is displayed, the screen returns to
the initial screeen. Up to 300 items of data can be stored
in the memory. If the number of data items exceeds the
maximum limit, ERR 10 is displayed and no more data
can be stored.
Data cannot be stored unless the value has stabilized or
in the CAL mode.