horiba d-51, Инструкция по эксплуатации

Страница: 19 / 91

1 Overview of the Meter
1.6 Connecting the electrodes
10 HORIBA
2.
Push the electrode connector into the connector
port while turning it clockwise, following the
grooves (see photo,
①
and
②
).
3.
Push the connector cover over the connector
(see photo,
③
), being careful to push it straight
on without turning it.
The meter will be waterproof only if this cover is placed
properly over the connector.
●
Temperature connector
1.
Insert the temperature connector into the jack on
the main unit until the O-ring on the electrode
cannot be seen at all (see photo,
④
).
The meter will not be waterproof if the electrode is not
inserted properly.
When the temperature electrode is not connected (or is
connected improperly), the automatic temperature
compensation (ATC) will be 25
°
C.