manualshive.com logo in svg

horiba d-51, Инструкция по эксплуатации

Поделиться
Скачать
horiba d-51 Скачать руководство пользователя страница 3

Preface

Thank you for purchasing the D-51 pH meter .
This meter is designed with a compact body that can be held in one hand and               
features a water-resistant construction Note 1. It has a large-sized LCD display,           
which enables to use the varied functions by simple  operations,  and  especially           
will be convenient to use on-location.
Carefully read this manual before using the meter.

Note 1: The water-resistant construction of this meter conforms to IP-67 of IEC            
529, entitled “Water resistant testing and protection against penetration by solid          
matter for electrical machinery and equipment.” To maintain the water-resistant         
construction of this meter, follow the instructions in this manual when using the            
meter.

IP-67 standards

・

Dust does not get into internal parts.

・

Water does not flow into internal parts when the meter is submerged 1  m             

below the surface of the water for 30 minutes, at a  temperature differential             
between the water and the device of 5

℃

 or less.

HORIBA's Warranty and Responsibility

Your  meter  is  covered  by  HORIBA's  warranty  for  a  period  of  one  (1)  year,  under              
normal use. Although unlikely, if any trouble attributable to HORIBA should occur           
during this period, necessary exchange or repairs shall be conducted by HORIBA,           
free of charge. The warranty does not cover the following:

・

Any trouble or damage attributable to actions  or  conditions  specifically         

mentioned to be avoided in the operation manuals 

・

Any trouble or damage attributable to use of the meter in ways or for             

purposes other than those described in the operation manuals

・

If any repairs renovations, disassembly, etc. are performed on this meter by           

any party other than HORIBA or a party authorized by HORIBA

・

Any alteration to the external appearance of this pH meter attributable to           

scratches, dirt, etc. occurring through normal use

・

Wear and tear to parts, the exchange of accessories, or the use of any parts              

not specified by HORIBA

HORIBA also shall not be liable for any damages resulting from any malfunctions 

of this product, any erasure of data, or any other uses of this product.

Unauthorized reprinting or copying of this operation manual

No unauthorized reprinting or copying of all or part of this operation manual 

is allowed. The utmost care has been used in the preparation of this operation 

manual. If, however, you have any questions or notice any errors, please contact 

the HORIBA customer service center printed on the back cover of this operation 

manual.

 Copyright © HORIBA, Ltd. 2003

Содержание d-51




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды