Hongqi E-HS9, Руководство пользователя

Страница: 195 / 395

4-5. Operating other driving systems
193
D
ri
v
in
g
4
Notice
◼
Be careful not to bump the bumper when parking, as this may displace or damage
the sensors in the bumper and the system will shut down automatically or the
system function will be affected.
◼
To ensure that the system works properly, the sensors in the bumper must be kept
clean and must not be covered by other objects.
◼
Only paint approved by our company is allowed to be applied to the bumper.
Spraying other types of paint may result in limited function or system failure of the
BSD system.
◼
If the BSD does not work properly, shut down the system immediately and contact
the authorized FAW Hongqi dealer for maintenance.
◼
After the BSD system is repaired, it needs to be calibrated. For more information,
please contact the authorized FAW Hongqi dealer.
◼
BSD only serves as an auxiliary alert and cannot completely prevent collisions
with vehicles in the blind spot. Before changing lanes, be sure to check your
mirrors, scan backwards and turn on the turn signal lamp.
◼
The BSD system may cause false alarms or missed alarms under special working
conditions, such as cloudy and wet weather, high speed, which is normal.
◼
When the rear BSD radar of the vehicle is blocked, it will cause the system to be
inoperative and needs to be cleared in time.
◼
The BSD system is limited by physical laws and system conditions and may not
correctly identify traffic conditions under certain driving conditions. Such as the
following situations.
⚫
During a sharp turn lane.
⚫
When in travel lanes of different widths.
⚫
When on undulating roads in mountainous areas.
⚫
During adverse weather conditions.
⚫
At certain special structures on the roadside, such as higher or staggered highway
guardrails.