Hongqi E-HS9, Руководство пользователя

Страница: 329 / 395

7-3. Self-maintenance
Wheel
327
Wheel
If the rim is bent, cracked or severely corroded, it should be replaced.
Otherwise, the tire may separate from the rim or cause the vehicle to lose control.
◼
Wheel selection
When replacing the wheels, care must be taken to ensure that the replacement wheels
have the same load capacity, diameter, rim width and offset distance as the original
wheels.
Replacement wheels are available from FAW authorized Hongqi dealers.
FAW recommends against the use of the following wheels:
⚫
Different size or type of wheels.
⚫
Old wheels.
⚫
Bent wheels that have been straightened.
◼
Precautions on aluminum wheels
⚫
Always use the wheel bolts and wrenches for this aluminum wheel.
⚫
Check and confirm the wheel bolts tightness when changing, repairing or replacing
the wheel.
⚫
When using tire chains, be careful not to damage the aluminum rim.
⚫
When balancing the wheels, only use the balancing blocks specified by FAW or
equivalent products.
WARINING
◼
When replacing the wheels
Do not use wheels that are different from the model of this vehicle, as this may cause
the vehicle to lose control.
◼
When installing the wheel bolts
⚫
Tighten wheel bolts until the cone contacts the wheel bolt seat of the rim.
⚫
Do not apply oil or grease to the wheel bolts.
Oil and grease may overtighten the wheel bolt and cause damage to the bolt or spoke
plate type wheel. In addition, oil or grease can cause wheel bolts to loosen and
dislodge the wheel, which can cause an accident and lead to serious injury or even
death. Remove all oil or grease on the wheel bolts.
◼
Do not use defective wheels
Do not use cracked or deformed wheels.
Otherwise, it may lead to air leakage from the tire while driving, which may cause an
accident.