Hongqi E-HS9, Руководство пользователя

Страница: 194 / 395

4-5. Operating other driving systems
192
BSD system ON/OFF
You can set the on and off of BSD system in the vehicle settings of the multimedia system.
(Refer to P.225)
◼
Under the following conditions, the BSD and lane change assist may not alarm or
delay the alarm:
⚫
The vehicle is driving on a steep slope.
⚫
The vehicle is driving through a mountain top or mountain road.
⚫
There is a height difference between the driving lane and the adjacent lane.
⚫
The turning radius is small.
⚫
The vehicle is driving on snow-covered roads for a long period of time.
⚫
A large amount of snow or ice are gathered near the radar sensor.
◼
Under the following conditions, the BSD and lane change assist may advance or
expand the alarm:
⚫
If the two lanes are too narrow, an alarm will occur in the other lane.
⚫
The vehicle is driving on roads with fixed obstacles (such as tunnel walls, viaduct
concrete barriers, metal billboards, etc.) near the side of the body for a long period of
time.
◼
Under the following conditions, RCTA may fail to make alarm or expand the alarm
range:
⚫
The vehicle is parking at an angle.
⚫
The reversing speed of the vehicle is more than 15km/h.
⚫
A large amount of snow or ice are gathered near the radar sensor.
⚫
The target vehicle speed and yaw angle keep changing in the detection area.
⚫
A vehicle is approaching the vehicle directly from behind.
◼
Under the following conditions, door opening warning may fail to make alarm or
expand the alarm range:
⚫
A large amount of snow or ice are gathered near the radar sensor.
⚫
The vehicle is driving on roads with fixed obstacles (such as tunnel walls, viaduct
concrete barriers, metal billboards, etc.) near the side of the body.
◼
Under the following conditions, RCW may fail to make alarm or expand the alarm
range:
⚫
A large amount of snow or ice are gathered near the radar sensor.
⚫
The target vehicle speed and yaw angle keep changing in the detection area.