Hongqi E-HS9, Руководство пользователя

Страница: 163 / 395

4-5. Operating other driving systems
161
D
ri
v
in
g
4
Notice
◼
ACC will keep the set following distance to follow the target, if the target vehicle
slows down and stops, ACC will control this vehicle to slow down and stop
automatically.
◼
When the target vehicle stops for less than 3s and re-starts or leaves the lane, this
vehicle will automatically start under the control of ACC.
◼
When the target vehicle stops for more than 3s but not more than 10min and
restarts or leaves the lane, the instrument cluster multi-function display of the
vehicle will prompt the information of resuming cruise, and the driver can resume
ACC function by lightly pressing the accelerator pedal or toggling the cruise
control handle to "RES+" to realize automatic starting. At this time, the driver
should pay attention to judge whether it is safe to start.
◼
ACC will be disengaged automatically when this vehicle is stopped for more than
10min.
◼
ACC does not keep the vehicle in the braking state for a long time. Do not leave
the vehicle while ACC keeps the vehicle at a stop. Always put the vehicle in P gear
before leaving the vehicle.
◼
The following should be noted when using ACC to cross curves:
⚫
In sharp corners, ACC may exit or perform speed limits.
⚫
On curves, ACC may react to a vehicle in another lane or may not have time to react
to a vehicle in the same lane and may collide with the vehicle ahead or lose control of
the vehicle, especially when driving in an on-ramp may cause the system to lose its
target and thus accelerate due to excessive curves. Pay extra attention on curves and
be prepared to apply the brakes if necessary, and choose the appropriate speed
when driving on curves.
◼
When the vehicle follows the vehicle ahead to pass the intersection with traffic
lights, the driver should pay attention to the traffic light change and take the
initiative to intervene in the vehicle when necessary to avoid violating traffic rules.
◼
When the vehicle is in dense fog, rain, snow and other weather conditions, or
there are frost and dirty marks in the camera window area of the advanced DAS, or
when the vehicle is driving towards the sun (or strong light source), the camera
may report "The camera of the advanced DAS is blocked, please clean the
windshield" through the instrument cluster due to "limited vision", and the ACC
cannot work at this time.