Hongqi E-HS9, Руководство пользователя

Страница: 161 / 395

4-5. Operating other driving systems
159
D
ri
v
in
g
4
WARINING
◼
The front windshield must not be modified or covered by any auxiliary equipment,
otherwise ACC may not work properly.
◼
When leaving the driver's seat for a long time, make sure to turn off ACC to avoid
accident caused by misoperation.
◼
When this vehicle is following the target vehicle, ACC mainly controls the
following distance, and the actual speed of this vehicle may be lower than the set
cruising speed.
◼
During ACC, when the vehicle is too close to the vehicle in front (for example, due
to the sudden emergency braking of the vehicle in front), the system will send an
audible and visual alarm alert to the driver through the instrument cluster, and
then the driver should pay attention to the distance and take over the vehicle
control.
◼
When the driver presses the accelerator pedal to actively accelerate, the cruise
speed icon displayed on the instrument cluster multi-function display will flash,
which is a normal phenomenon. Meanwhile, when the driver releases the
accelerator pedal and then immediately toggles the c
ruise handle “SET-”, the
current speed can be set as the targeted cruise speed.
◼
ACC may lose the target vehicle or misidentify the target vehicle when the vehicle
enters or exits a curve, changes lanes, or when the vehicle ahead is stationary.
◼
ACC can not detect other sides except the rear of the vehicle, children,
pedestrians, animals or other objects and apply braking, so it is necessary to
drive carefully.
◼
ACC has limited braking ability and when a vehicle ahead suddenly slows, stops
or enters your lane, there may not be time to reduce your speed to avoid a
collision with the vehicle ahead. In the event of a perceived danger, please
depress the brake pedal actively.
◼
Driving always requires full attention and you should always be prepared to take
action and apply the brakes.
◼
The driver needs to adjust the following distance and set the ACC system
according to the traffic flow ahead and the current weather conditions (e.g. rain
and snow). The driver needs to ensure that the vehicle can be slowed to a stop
within his or her field of vision at all times.
◼
ACC can only recognize motor vehicles (such as cars, trucks, etc.) with legal
license plates installed and able to drive on the road. If the vehicle in front is
irregular in shape, refitted, sprayed and covered, the recognition effect cannot be
guaranteed, and the recognition of pedestrians and narrow vehicles (such as
bicycles, motorcycles, etc.) cannot be guaranteed. At this time, the driver should
take over the vehicle at any time according to the actual situation.
◼
The ACC system may fail to recognize large trailers accurately, and the driver
should control the vehicle at any time according to the actual situation.
◼
The ACC system cannot accurately determine the passable width of the lane
ahead, therefore, when the lane ahead of this car is too narrow and the driver
feels that he cannot pass normally, he should immediately disengage the ACC
system by brake intervention and control the vehicle by himself.