Operation
SDC / DHC 43
11
EN2H-0220 GE51 R1005
•
Shift to the menu selection level
•
Get one menu level higher
By turning the rotary pushbutton, you can:
•
Change values (clockwise increases values, counter-
clockwise decreases values)
•
Browse through menus
4.1.2.2 "Daytime Room Temperature" Key
This key sets the room temperature setpoint in the
automatic program during the heating cycles as well as
during the
PARTY
and
HEATING
operating modes. In
control mode 1, the setpoint is identical for all the heating
circuits. In control mode 2, the setpoint can be individual
for all circuits. To change the control mode, see "Mode"
section
Setting:
►
Press the "daytime room temperature" key
¥
.
►
Set the flashing room temperature default value by
turning the rotary pushbutton
î
to the desired value.
►
Confirm the set value by pressing either the "daytime
room temperature" key
¥
key
or the rotary
pushbutton
î
.
►
Alternatively, the value can be acquired by automatic
exit after the set INFO-TIME (see "System
Information).
Factory setting
20
°C
Setting range
5...30
°C
4.1.2.3 "Night-time Room Temperature" Key
This key sets the reduced room temperature setpoint in
the automatic program between the heating cycles as
well as during the
ABSENT
and
REDUCED
operating
modes. In this operating mode, the setpoint is identical
for all the heating circuits.
¥
¦
ROOM-DAY
22.0
o
c
æ ç è é ê ë ì í
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]
