SDC / DHC 43
Operation
EN2H-0220 GE51 R1005
34
4.2.3 System Parameter Menu
The parameters in this menu refer to general limit
parameters and default values within the heating system.
Entry see "Menu Selection".
Exit
To return to the basic display directly, press the
"operating mode" key
¢.
Alternatively, the value can be acquired by automatic exit
after the set INFO-TIME (see "System Information).
4.2.3.1 Language Selection
Function
Several languages can be chosen for all the information
appearing on the display.
Factory setting
GERMAN
Setting range
GERMAN, ENGLISH, FRENCH, ITALIAN (other
languages are being prepared)
Setting value
1:
GERMAN
2: ENGLISH
3:
FRENCH
4:
ITALIAN
Function
Following the selection and confirmation by pressing the
rotary pushbutton the further display information is given
in the relevant language.
4.2.3.2 Time Programs
Function
This parameter determines the enabling and disabling of
the time programs for the heating circuits. When
supplied, only a single time program is enabled. The use
of only a single time program will simplify the operation.
Factory setting
P1
Setting range
P1,
P1-P3
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]
