Operation
SDC / DHC 43
35
EN2H-0220 GE51 R1005
Setting values
P1:
Program 1 enabled, Programs 2 and 3 =
blocked
P1-P3:
All three programs enabled
Effects
Besides the settings described above, the enabling of
programs P1 to P3 provides for the following additional
setting options:
4.2.3.2.1 Operating
Mode
Setting
The time programs P1, P2 or P3 can be selected in the
operating modes automatic and summer.
4.2.3.2.2 Time
Programming
When programming, each heating circuit can be
assigned one of the three time programs P1-P3.
4.2.3.3 Control Mode
Factory setting
1
Setting range
1,
2
This parameter determines the control mode and has
effects on the:
- Operating mode selected with the "operating mode" key
¢
- Daytime temperature selected with the "daytime
temperature" key
¥
- Nighttime temperature selected with the "night-time
temperature" key
¦
with regard to the effect on the various heating circuits.
Setting values
1:
The selected setting (operating mode, daytime
temperature, Nighttime temperature) applies
for all the heating circuits equally.
2:
Each heating circuit can be assigned its own
setting (operating mode, daytime temperature,
nighttime temperature).
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]
