Honeywell Rapid Eye, Руководство администратора

Страница: 44 / 294

44
Connecting to a Rapid Eye Unit
You have the option of changing the Site Name. If you do so, make a note of the new
site name, for use in
step 4 of this procedure.
Figure 3-3 LocalView Network Settings: DHCP
Note In LocalView, the Site Name field shows what can also be called a unit’s
computer name or network name in the Admin software. The Site Name
assigned in Admin is a label to identify a unit when using the View application.
2. Click Refresh. Using the Admin software, start Working with Connections , page 41 .
3. In the Add Connection window, select Use Existing Network Connection (see
Figure 3-4 ).
4. In the IP Address field, enter the site name used in LocalView, as indicated in step 1
of this procedure.
5. You have the option of changing the connection name (
[site name] ->
Network
), to indicate the use of a dynamic IP Address, by entering the Connection
Name. For example, Figure 3-4 shows that DHCP was added.
6. Click Save and Close. For a report, see Connection Report on page 56 .
Figure 3-4 Inputting the Site Name from LocalView into a DHCP Connection
Dynamic Host Configuration Protocol Without DNS
While Working with Connections , page 41 :
Entered by the
operator