Honeywell Rapid Eye, Руководство администратора

Страница: 170 / 294

170
Managing User Accounts
Setting Local User Management
A LocalView administrator has the option of setting User Management to Local. Accounts
that were created centrally will remain on the unit.
Central User Management
Creating Accounts Using Admin
Central User Management only disables the onsite creation of operator accounts using
LocalView. If Central User Management is enabled, a Multi SA uses the Admin application
to create accounts. These central accounts can access Multi-Media units using the View
application or LocalView.
Figure 9-1 Changing User Management
Setting a Unit to Central User Management
1. While using Admin to update (or create) a site’s definition, click the Change button
next to Local User Management is in effect (see
Figure 9-1 ). A dialog box appears
to confirm setting the site to central user management. After clicking Yes, the
message next to the button changes to
Central User Management is
pending
.
2. Use View to run a Maintenance Session at the site. Click the Security tab.
3. Click Update Security. The procedure to update security is shown in Updating
Security on a Multi-Media Unit , page 143 .
Click to change
the local user
management