Honeywell Limitless WMPR Series страница 46 Скачать руководство пользователя | Manualshive

Страница: 46 / 46

background image

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free
of defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order acknowl-
edgement or consult your local sales office for specific war-
ranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items that Honeywell, in its
sole discretion, finds defective.

The foregoing is buyer’s sole

remedy and is in lieu of all other warranties, expressed or
implied, including those of merchantability and fitness for a
particular purpose. In no event shall Honeywell be liable for
consequential, special, or indirect damages.

While Honeywell may provide application assistance personally,
through our literature and the Honeywell web site, it is cus-
tomer’s sole responsibility to determine the suitability of the
product in the application.

Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, Honeywell assumes no responsibility for its use.

Installation and Technical Manual for the

Limitless™ Multi-Protocol Receiver, WMPR Series

ISSUE B

32309669

Notices and Trademarks

While this information is presented in good faith and believed
to be accurate, Honeywell disclaims the implied warranties of
merchantability and fitness for a particular purpose and makes
no express warranties except as may be stated in its written
agreement with and for its customers.
In no event is Honeywell liable to anyone for any indirect, spe-
cial or consequential damages. The information and specifica-
tions in this document are subject to change without notice.
Honeywell is a registered trademarks of Honeywell Internation-
al Inc.
Other brand or product names are trademarks of their respec-
tive owners.

COAX-SEAL

®

is the registered trademark of Universal Electronics.

Scotch

®

is the registered trademark of 3M.

EthernNet/IP

®

is the registered trademark of ODVA, Inc.

32309669-B-EN | 2 | 02/18
© 2018 Honeywell International Inc. All rights reserved.

For more information

Honeywell Sensing and Internet of
Things services its customers through a
worldwide network of sales offices and
distributors. For application assistance,
current specifications, pricing or the
nearest Authorized Distributor, visit
sensing.honeywell.com or call:

Asia Pacific

+65 6355-2828

Europe

+44 (0) 1698 481481

USA/Canada

+1-800-537-6945

Honeywell Sensing and Internet of Things

9680 Old Bailes Road
Fort Mill, SC 29707
www. honeywell.com

«
...
44
45
46

Содержание Limitless WMPR Series















































Отзывы:

Нет отзывов

Похожие инструкции для Limitless WMPR Series

Бренд: Caliber Страницы: 16

Бренд: Caliber Страницы: 11

Бренд: Lafayette Страницы: 62

Бренд: X-Boss Страницы: 2

Бренд: Yaesu Страницы: 44

Бренд: Sandstrom Страницы: 36

Бренд: Advance Paris Страницы: 2

T2 516 HD USB PVR

Бренд: E Star Страницы: 36

IZAR RDC STANDARD

Бренд: Diehl Страницы: 40

Бренд: Barlow Wadley Страницы: 11

Бренд: Tait Страницы: 72

Бренд: Rockville Страницы: 16

Бренд: Denon Страницы: 167

Бренд: Milennia Страницы: 8

Бренд: Aiwa Страницы: 18

Бренд: JRC Страницы: 58

Air-Eagle SR 38-2000-DC

Бренд: BWI Eagle Страницы: 8

Бренд: Avenview Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды