manualshive.com logo in svg

Honeywell Limitless WMPR Series, Инструкция по установке и техническое руководство

Поделиться
Скачать
Honeywell Limitless WMPR Series Скачать руководство пользователя страница 40

36    

sensing.honeywell.com

Installation and Technical Manual for the 

 

Limitless™ Multi-Protocol Receiver, WMPR Series

ISSUE B

 

32309669

9  |  WMPR MOUNTING

The WMPR is intended to be mounted to a DIN Rail or mounted 
via the mounting plate.

9.1  |  DIN Rail Mounting

The WMPR DIN Rail bracket is supplied with the WMPR and can 
be “snapped” onto a 35 mm DIN Rail.

Figure 59. Limitless™ WMPR DIN Rail bracket

9.2  |  Tab Mounting

The WMPR has four tabs mounting holes intended to allow 
mounting with a #8 style screw. As there are many types of 
screw fasteners, care should be taken to not overtighten the 
fastener. Also, ensure that the housing is being mounted on a 
flat surface.

Figure 60. Limitless™ WMPR Mounting Plate

10  |  INSPECTION AND  

MAINTENANCE

10.1  |  WMPR Inspection and Replacement

Periodic inspection
• 

Check the WMPR housing and connectors for signs of 
damage. Replace if necessary

• 

Check the condition of the LCD display for signs of crack-
ing or damage. Replace WMPR if necessary

• 

Check the proper operation of the Function Buttons  and if 
found non-functional, replace WMPR 

10.2  |  Antenna Inspection and Replacement

• 

Check antenna or cable connection to WMPR connector to 
ensure it is tight and bear no signs of damage or corrosion. 
Replace if necessary per Section 8.

Содержание Limitless WMPR Series















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды