Sensing and Internet of Things
21
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
ISSUE B
32309669
You can then scroll “Up” or “Down” to the desired LCD Time and
touch “Start” to initiate the change in LCD Time which will lead
to the display in Figure 40 momentarily before returning to the
previous screen display with the updated LCD Time; Figure 39:
Figure 39. Node LCD Time - LCD Time Displayed (i.e.,
0%)
Figure 40. Node LCD Time - Updated LCD Time Dis-
played (i.e., 5s, Off 5s)
Note: If the particular Node # that you are trying to update does
not have an LCD display, the screen will display “Node LCD
N/A”.
6.12 | Factory Reset Receiver Mode, GEN
code Version 1 ONLY
Figure 41. Factory Reset Receiver Mode
NOTICE: When a Factory Reset Receiver is performed, a factory
reset should also be performed on all functioning switches and
sensors that were paired to the WMPR. See “Restore to Factory
Defaults” in the WPS Installation and Technical Manual and
“Purge Mode” in the specific switch series’ Installation and
Technical Manual.
The Factory Reset Mode (see Figure 41) can be accessed by
touching the “FACTORY RESET RCVR” function button as dis-
played in the Configuration Menu (see Figure 21). The Factory
Reset Mode will purge all nodes from the WMPR and reset to
Factory settings. Touching the “Start” function button will initi-
ate the Factory Reset process and lead to the display in Figure
42 momentarily before displaying the Receiver information;
Figure 43:
Figure 42. Reset of Receiver In-Process
Figure 43. Network Start Notice
You must touch the “HOME” function button to return to the
CONFIGURATION MENU.
