Sensing and Internet of Things
37
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
ISSUE B
32309669
11 | CHOOSING A WMPR SERIES
CATALOG LISTING
This section is intended to be used for identifying a catalog listing from the WMPR nomenclature to determine suitability in a
particular application.
Figure 61. Limitless™ WMPR Nomenclature
WMPR
Receiver type
A
Country use
code
A
B
US,
Canada
All other
approved
countries
WMPR
Series
Multi-Protocol
Receiver
1
GEN code
A
RF code
1
Version 1
A
2.4 GHz;
IEEE 802.15.4
00
02
00
No antenna; RP-SMA
connector jack
2.2 dBi omni w/receiver
mount; tilt/swivel
Antenna
type code
1
Output code
1
EtherNet/IP™
A
Seal code
A
IP20
1
Mounting
code
1
2
Mounting
plate, epoxy
coated CRS
DIN
bracket,
aluminum
Specials
2
Version 2*
*GEN code 2 is not ODVA certfied due to programming allowing a static (permanently assigned) IP address.
The following procedure refers to appropriate sections in this manual to determine/build a WMPR listing.
1. Determine the country the product will be used in. Review
Section 2.1 (Intended Country Usage) to determine the
Country Use Code (A or B) in relation to the country the
WMPR will be used in.
2. Determine the antennas and/or Antenna Type Codes
allowable for use. Review Section 2 (ANTENNA OPTIONS
ALLOWED PER COUNTRY USE CODE) to determine the
antennas/cables allowed for use in a particular country
(based on the Country Use Code determined in Step 1).
Some antenna/cable options can be ordered with the
WMPR and some are ordered separately. If an antenna is
ordered separately, choose Antenna Type Code 00 (see
product nomenclature).
3. Review Section 8.4 (Overview of Antenna Options) against
the antenna list identified in Step 2. Initially, narrow options
by choosing a desired antenna that can be used indoor/
outdoor or indoor/limited outdoor exposure.
4. Review Sections 8.2 & 8.3 (Omni-directional Antenna
Design & Antenna Mounting and Considerations) for a
background of antenna design, considerations, warnings,
etc. Choose a possible direct- or remote-mount antenna.
5. Section 8.4 helps to determine the antenna material most
suitable for use based on the application environment.
Also consider the effects of lightning or RF Interference (if
applicable).
12 | QUICK START UP AND
INSTALLATION
There are many sections in this manual that describe the
consideration, concerns, specifications, etc. with respect to
country of use, antenna choices, environmental effects, etc. The
following sections are useful for initially “starting up” the WMPR
and associated Limitless™ input.
,
ATTENTION
Ensure that the country the product is being used in appears
in the chart along with the correct Country Use Code on
the WMPR label. Review Section 2.1 and 7.1 in this manual.
If required, contact Honeywell before use of the WMPR in
Countries not listed in Table 3 thru 6 in Section 2.1.
Table 25. Suggested Start-Up Sections to Review
Suggested Start-up Sections to Review
Section
Electrical Configurations/Connections
5.1 to 5.3
Start-up or Restart Sequence Mode
6.1
Main Menu > Action Menu > Pair Mode
6.8
Antenna Connection, Styles, and Mounting Op-
tions
8.5.3
Antenna Adjustment Considerations
8.5.4
Antenna Environmental Usage/Concerns
8.6
Choosing an Antenna Gain (dBi) with Acceptable
Fade-Margin
8.7
WMPR mounting
9
