Honeywell IntelliDoX Скачать руководство пользователя страница 42

Страница: 42 / 120

INTELLIDOX DOCKING MODULE USER MANUAL || DOCK STATION SETTINGS

HONEYWELL

PAGE 41 OF 119

Configure Gas Inlets

For each attached calibration gas cylinder, you must configure the gas blend, and then

configure each gas type and concentration contained in the gas blend. You may also

record the lot number of the calibration gas cylinder.
If a single-inlet key is inserted in an individual module or all connected modules in a group,

then you can attach one calibration gas cylinder. If a multi-inlet key is inserted in an

individual module or one or more connected modules in a group, then, then you can

attach up to four calibration gas cylinders. For more information, see

Inlet Keys

If the module is part of a group of up to 5 connected modules, then changes to the gas

inlet settings affect all of the modules in the group. If the group contains both single-inlet

and multi-inlet key modules, then changes to Inlet 1 affect all modules and changes to

Inlets 2, 3 and 4 affect the multi-inlet key modules only.

Configuring Gas Inlets

1. Press and hold

on the keypad until

Adjust dock station settings

is displayed on

the LCD.

2. Press or to select

Configure gas inlets

and then press

. If the procedure is

passcode-protected, then enter the passcode and press to continue.

3. The

Inlet overview

for Inlet 1 is displayed. If a multi-inlet key is inserted in an

individual module or one or more connected modules in a group, then four inlet tabs
are displayed. Press or to select and configure a different inlet.

4. Configure the gas blend for the selected inlet.

a) Press to display the

Inlet edit

menu.

Gas blend

is highlighted.

b) Press to select

Gas blend

, and then press or to select a single-gas

blend or a multi-gas blend of 2 or more gas types. If the inlet is not

connected to a gas cylinder, select

No inlet

c) Press to save the changes and return to the

Inlet edit

menu, or press

to abandon the changes and return to the

Inlet edit

menu.

Содержание IntelliDoX

























































































































Результаты поиска

Содержание IntelliDoX

Отзывы:

Honeywell IntelliDoX, Руководство пользователя, Страница: 42 / 120

Результаты поиска

Содержание IntelliDoX

Отзывы: