Honeywell HRXD16, Руководство пользователя

Страница: 92 / 156

Configuration
92
12. Highlight the second box beside Temperature Threshold , and press . Select
either °C (Celsius) or °F (Fahrenheit) , and press .
Note The box beside Last Check-Time displays the Date and Time of
the last S.M.A.R.T. check.
13. Highlight OK , and press to accept the changes. Selecting Cancel exits the
screen without saving the changes.
14. Highlight the Actions tab and the System Event Actions screen ( Figure 3-79 )
displays.
Figure 3-79 System Event Actions Screen
The DVR can be setup to react to system events. System events can be
associated with an Alarm-Out connector, sound the DVR’s internal buzzer, and/or
notify a number of different devices.
15. Highlight the Alarm-Out box beside the desired event ( Check Recording , Check
Alarm-In , Disk Almost Full , Disk Full , Disk Bad , Disk Temperature , or Disk
S.M.A.R.T. ), and press . A list of Alarm Outputs appears. You can associate as
many Alarm-Outs with the Event as you wish. If the DVR detects that event, it
triggers output signals on all the associated Alarm-Out connectors. You can also
have the DVR’s internal buzzer sound if an event is detected.
Note Alarm-Out action cannot be set to System and Panic Record
events.
16. Highlight the Notify box beside the desired event and press . You can toggle
the entire list On and Off by highlighting Notification and pressing . You can
toggle the individual items On and Off by highlighting that item and pressing .
Highlight OK and press to accept your changes.