20
Menu controls
Menu controls
Panel beeps
on button press
On
Flashing
Vigilon Fire System
GENT 2015
Designed to EN54 Pt 2 & 4
Panel Healthy
15:45
Fault
System Fault
Delay
Test
Fire
Power
Power Fault
Verify
Disablement
Sounder
Previous
Next
[Control] [ Set Up ] [ Info ] [ Test/Eng]
Sound Alarms
Silence Alarms
Reset
Cancel Buzzer
Menu On/Off
F4
F3
F1
F2
Verify
Active
Fault/Dis
Fire Routing O/P
The
MENU ON/OFF
button activates the function keys F1 to F4 for the
selection of menu prompts that appear above the function keys on the display.
At any level in a menu, single press of the
MENU ON/OFF
key aborts an
operation. However as an alternative the
[Quit]
option can be selected to exit
the function mode.
If the time taken between key presses exceeds
fi
ve minutes, then the control
panel will automatically remove the menu options from the display and give a
system status indications.
The
[Params]
option is a Help function to
provide information to the user regarding the
type of input data required.
Most of the functions in the
[Control], [Setup]
and
[TestEng]
menu options are protected with
password entry. The password is programmed
during the commissioning of the system and is
passed on to the site person responsible for the
fi
re alarm system.
An open access to controls
under User code is undesirable,
so it is recommended that a
customer password is setup.
Where a
password
code is not set up, there
is an open entry to operate the controls under
[User Code]
. Where this is true the instructions
for entering the access code, password (or PIN)
in the following instructions should be ignored.
