Honeywell AlarmNet 7810iR, Руководство по установке и настройке, Страница: 45 / 64

Section 6: Message Formats
6-13
Contact ID Format
Contact ID reporting takes the following format:
CCCC Q EEE GG ZZZ
Where:
CCCC = customer (subscriber account number)
Q = event qualifier, E = new event, R = restore
EEE = event code
GG = partition number, 00-08 (always 00 for non-partitioned panels)
ZZZ = zone ID number reporting the alarm (001-099), or user number for open/close reports.
* System status messages (i.e. AC Loss, Low Battery) contain zeros in the ZZZ location.
SUBSCRIBER ID #
XXXX
EVENT
QUALIFIER
Event or
Restore
E or R
EVENT CODE*
000
PARTITION #
00
ZONE OR
USER #
C000 or U000
Event Code Classifications
Medical
100 Medical Emerg-Personal Emergency-#
101 Pendant Transmitter Emerg-Personal Emergency-#
102 Fail to report in Emerg-Fail to check in-#
Fire Alarms
110 Fire Fire-Fire Alarm-#
111 Smoke w/Verification Fire-Fire Alarm-#
112 Combustion Fire-Combustion-#
113 Waterflow Fire-Water Flow -#
114 Heat Fire-Heat Sensor-#
115 Pull Station Fire-Pull Station-#
116 Duct Fire-Duct Sensor-#
117 Flame Fire-Flame Sensor-#
118 Near Alarm Fire-Near Alarm -#
Panic Alarms
120 Panic Alarm Panic-Panic-#
121 Duress Panic-Duress- User 000, or duress zone number on
low end panels
122 Silent Panic-Silent Panic-#
123 Audible Panic-Audible Panic-#
124 Duress-Access Granted Panic-Duress Access Grant-#