Honeywell AlarmNet 7810iR, Руководство по установке и настройке, Страница: 33 / 64

6-1
S E C T I O N 6
Message Formats
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
Message Formats
♦
ADEMCO Contact ID Format
♦
ADEMCO High-Speed Format
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Message Formats
There are two categories of messages that are sent by AlarmNet to the Central Station.
•
Subscriber Messages – indicate alarm or trouble conditions at the subscriber premises,
or identify issues with the subscriber radio, the 7845i Graphical User Interface, that is
enabled for Internet reporting or that may need attention. Subscriber messages can be
sent in one of two formats; ADEMCO high-speed or Contact ID
•
Network Messages – indicate specific conditions with the AlarmNet network, central
station transceivers, and or subscribers. Network messages are sent in ADEMCO high-
speed
ONLY and m ay include messages for subscribers # 0000 or # 0001
ADEMCO Contact ID Format
Consists of:
•
A 4-digit subscriber ID
•
A ‘qualifier’ that indicates whether the message is an event or a restoral
•
An event code indicating the type of AlarmNet
•
An optional partition number
•
The exact zone or user number that initiated the report
How Contact ID is Displayed on 7810iR
7810iR-004-V0
1234 18 E 130 00 C 001
SUBSCRIBER TYPE
= AlarmNet
A = AlarmNetA
C = AlarmNetC
M = AlarmNetM
S = System
DATE
TIME
SUBS ID
EVENT QUALIFIER
An "E" for Event,
or an "R" for Restore.
CID IDENTIFIER
Always "18" Identifies the
message as a Contact ID format.
Does NOT display on the receiver.
EVENT CODE
PARTITION #
C = CONTACT
U = USER
ZONE OR USER#
I 23:52:00 07/11/02
RX LINE NUMBER
14