Honeywell AlarmNet 7810iR, Руководство по установке и настройке, Страница: 41 / 64

Section 6: Message Formats
6-9
Status Channel = 5 (Subscriber Trouble / Special Report)
Message Definition Applies to
Key Indicator: Account # = “0000” or “0001”
0000 5555 5515 5
0001 5555 5515 5
Master Host Alarm
The 685 generates this message internally. It indicates a
failure to connect to the network. This may be caused by:
Antenna failure
Radio receiver failure
Substantial interference
Network outage
A, I & M
0000 5555 5535 5
0001 5555 5535 5
Master Host Alarm Restore A, I & M
0000 5555 1555 5
0001 5555 1555 5
Master Host Alarm Reminder
Notifies the central station that the redundant receiver has
lost connection to the 685.
M & I
0000 5155 5555 5
0001 5155 5555 5
Check 685 Printer
Tells the C/S to refer to their printer for messages that
might not be reported through the automation system.
A & M
NOTE: For subscriber reporting, each channel that displays these message types
corresponds to a particular type of event. Because there are eight channels, it is possible for
multiple events to be reported in multiple channels in only one message.
(Example: The message “cccc 1555 5355 5” indicates a fault on zone 1 and a restore on zone
6.)
cccc zzzz zzzz 5 Fire Zone Supervisory Fault
z = zone number corresponding to the channel position (1
– 8)
1 = new zone fault
3 = zone restore
5 = normal zone condition
6 = previously report zone fault
7720ULF or
7920SE only
cccc 5555 5515 5 Loss of ECP Supervision
(‘Master Host’ type message for an individual subscriber)
Applies to 7845C when used in 4229 or 4204 modes only.
7845C and
7845CZ