Honeywell Home TUXEDOW Скачать руководство пользователя страница 44

Страница: 44 / 56

TUXEDOW INSTALLATION AND SETUP GUIDE

Updating Controllers (Keypads) with New or Removed devices

When devices are added, or removed from the Z-Wave network, the device mapping information needs to be updated in the

Controllers. To update the device’s network map, you do not have to remove the device first. From the Primary controller, do

the following:

ICON

ACTION

NOTES

1. Touch

Add

on Primary controller.

2. Touch

Devices

Setup

More

Learn Mode

on Secondary controller.

The controller scans for device changes.

The message is displayed:

“Devices added Successfully”

Z-Wave Troubleshooting

Remote Services

The TUXEDOW™ supports Remote Services for controlling Z-Wave devices and scenes remotely from an associated Total

Connect account.

The following describes the related features:

•

TUXEDOW [automation] can be controlled from a smart phone, iPad

, Android

Tablet, Blackberry

or PC using Total

Connect and includes webpage support for iOS6 and Google-TV

•

Automation scenes can be created in both Total Connect and TUXEDOW

(Scenes created in Total Connect can be edited only via Total Connect)

•

Scenes created in Total Connect can be viewed from either Total Connect or directly from TUXEDOW using the Remote

selection on the TUXEDOW scenes page

•

Scenes created in TUXEDOW cannot be viewed from Total Connect.

NOTE:

It is assumed that Z-Wave

devices have already been enrolled in TUXEDOW. If not, refer to the

Devices

(Automation)

section in the Installation Instructions for details on enrolling Z-Wave devices and creating scenes. It

is also assumed the installer has an AlarmNet 360 account and is familiar with Total Connect. If not, contact an

AlarmNet representative to open an account.

The following table summarizes the relationships between Total Connect scenes and TUXEDOW scenes:

Controlling

Device

Scenes created in Total Connect

Scenes created in TUXEDOW

View

Edit Scenes

View

Edit Scenes

Total Connect

yes

TUXEDOW

yes

NOTE:

For troubleshooting purposes, Total Connect server information (including IP addresses) can be viewed on the

Total

Connect Server Setup

screen by touching the

button (see next page).

PROBLEM

SOLUTION

Cannot add new

device.

Make sure the Z-Wave device is within range of the TUXEDOW Touchscreen. You may need to

move the device closer to the keypad. Refer to the Z-Wave device Instruction Guide for proper

range.

Device is within

proper range but still

is not enrolled.

1. At the TUXEDOW Touchscreen:

a) Touch the

Devices

icon from the Home screen and then touch the

Setup

icon

to display the “Z-Wave Device Management”

screen.

b) If the device does not appear on the screen, touch the

Remove Device

icon.

2. At the Z-Wave device, touch the

Function Key

. The screen will display a message

“

Device Removed

”.

3. At the TUXEDOW Touchscreen:

a) Enroll device again.

Highlighted device

will not delete.

When deleting a device, if the selected device remains on the screen, highlight the

device name and touch the

REMOVE FAILED

icon.

Содержание TUXEDOW

























































Результаты поиска

Содержание TUXEDOW

Отзывы:

Похожие инструкции для TUXEDOW

Бренды по названию

Популярные бренды

Honeywell Home TUXEDOW, Инструкция по установке и настройке

Результаты поиска

Содержание TUXEDOW

Отзывы:

Похожие инструкции для TUXEDOW

Бренды по названию

Популярные бренды