Honeywell Home TUXEDOW Скачать руководство пользователя страница 31

Страница: 31 / 56

TUXEDOW INSTALLATION AND SETUP GUIDE

Device Events
ICON

ACTION

NOTES

1. From the Home screen, touch the

Setup, System Setup

and

CS Setup

icons.

2. Enter

Authorized Installer Code.

3. Touch the

Device Events

icon.

4. To reset, or clear, the events touch the

in the bottom right

hand corner of the screen.

The Device Events screen displays the

system events of the keypad only (resets,

time set, end user license accepted,

response types, etc.)
This is not the event log of the control

panel.

Code Authority
ICON

ACTION

NOTES

1. From the Home screen, touch the

Setup, System Setup

and

CS Setup

icons.

2. Enter

Authorized Installer Code.

3. Touch the

Code Authority

icon.

4. Enter the 4-digit code.
5. Touch to go back to the CS Setup Screen or

to exit.

A four-digit code can be entered to learn

the user name and Authority level of that

code.

Panel Config

ICON

ACTION

NOTES

1. From the Home screen, touch the

Setup, System Setup

and

CS Setup

icons.

2. Enter

Authorized Installer Code.

3. Touch the

Panel Configuration

icon to display the Panel

Hardware version, Panel Revision, Number of zones, Number

of Partitions, Home Partition, Cal Support, and Sequence.

4. Touch the

to delete the panel configuration (the

Touchscreen resets and the panel configuration is

downloaded from the panel into the Touchscreen.) or touch
to go back to the CS Setup Screen or

to exit.

A "Panel Configuration" screen is displayed

providing details of your system.
Touching

Delete

prompts you with a

confirmation screen displaying:
Are you sure you want to delete Panel

Configuration? OK Cancel.
If you touch OK, the TUXEDOW deletes

the configuration of the control, the

TUXEDOW reboots, and re-searches for

the installed control. Then, it downloads

the configuration again.

Содержание TUXEDOW

























































Результаты поиска

Содержание TUXEDOW

Отзывы:

Похожие инструкции для TUXEDOW

Бренды по названию

Популярные бренды

Honeywell Home TUXEDOW, Инструкция по установке и настройке

Результаты поиска

Содержание TUXEDOW

Отзывы:

Похожие инструкции для TUXEDOW

Бренды по названию

Популярные бренды