Honeywell Home TUXEDOW Скачать руководство пользователя страница 30

Страница: 30 / 56

TUXEDOW INSTALLATION AND SETUP GUIDE

CS Setup

You may access

Options, ECP Address, Screen Security, Device Events, Code Authority, Panel Configuration, TC

Server Info.

Options
ICON

ACTION

NOTES

1. From the Home screen, touch the

Setup, System Setup

and

CS Setup

icons.

2. Enter the

Authorized Installer Code.

3. Touch the

Options

icon.

4. Configure Options:

Weather Forecast:

Enable or Disable the Weather Forecast

on the home page.

Commercial:

Only available when in Automation Operating

Mode. Give you the option of Open, Close, and Night on the

Security screen.

5. Configure Operation Modes (See notes)

Touch

to save settings.

Normal Mode:

Runs keypad in normal

operation, connected to a supported

control panel.

Safe Mode:

See

Safe Mode

Section

Demo Mode:

Does not require a control

panel to be connected.

Automation Mode:

Used for controlling

and automating the home without a

control panel attached.
See

First Time Setup

for more detailed

information.

ECP Address
ICON

ACTION

NOTES

1. From the Home screen, touch the

Setup, System Setup

and

CS Setup

icons.

2. Touch the

ECP Address

icon.

3. Enter

Authorized Installer

Code

4.. Touch the ECP Address drop down menu and select the

desired address.

5. If using Total Connect, Set the RIS Automation ECP Address

by touching the drop down menu. Check the Primary RIS

Device only if you are not using total connect.

6. Touch

to save settings. (If changes were made the

keypad will reset.)

See

First Time Setup

section for more

detailed information.

Screen Security
ICON

ACTION

NOTES

1. From the Home screen, touch the

Setup, System Setup

and

CS Setup

icons.

2. Enter

Authorized Installer Code.

3. Touch the

Screen Security

icon.

4. If authority levels are correct, touch

to exit menu.

5. If changes are necessary, select the line to be changed and

the level of user to have access. Options are Installer,

Master, Manager, Operator A, Operator B, Operator C, or

Anyone.

6. Select

to save

The Screen Security screen contains a list

of authority levels for Advanced Setup, CS

Setup, Display & Audio Setup, Event Logs,

Lighting, Message, Security, and

Time/Date Setup. It allows you to choose

which authority level is required to access

each screen.

Содержание TUXEDOW

























































Результаты поиска

Содержание TUXEDOW

Отзывы:

Похожие инструкции для TUXEDOW

Бренды по названию

Популярные бренды

Honeywell Home TUXEDOW, Инструкция по установке и настройке

Результаты поиска

Содержание TUXEDOW

Отзывы:

Похожие инструкции для TUXEDOW

Бренды по названию

Популярные бренды