Honda NHSO aeroBO 1983, Руководство по ремонту

Страница: 102 / 184

CRAN KCASE/CRANKSHAFT
Set the crankshaft on a stand or in V blocks and
read runout at points A and B using a dial gauge.
SERVICE LIMITS: A:
0.10
mm
(0.004
in)
B:
0.10
mm
(0.004
in)
Spin the crankshaft bearing by hand and check for
play. The bearing must be replaced if it is noisy or
has excessive play.
CRANKSHAFT INSTALLATION
Wash the crankshaft in solvent and blow dry with
compressed air. Check for cracks or other faults.
NOTE:
• Apply clean engine oil to all moving and
sliding surfaces.
• Remove all gasket materials from the
crankcase mating surfaces. ·Dress any
roughness or irregularities with an oil
stone.
1 0-4
1 0 8
HONDA
NH80
mm mm
A
(2.4
in)
(2.4
in)
AXIAL
B
Date of Issue: May, 1983
© HONDA MOTOR CO., L TO.