Homentry HE60ANZ, Инструкция по установке и эксплуатации

Страница: 6 / 20

1
2
5
4
4
3
1
2
5
1
2
4
3
6
Insert carriage bolt (1) through square hole in cable pulley bracket (4). Remove chain/cable assembly (3) from
carton. Wrap cable around cable pulley (2) and insert pulley into bracket (NOTE: Make sure the bracket is
assembled in position shown) . Slide pin (5) through holes in cable pulley bracket and cable pulley. NOTE: Trolley
with magnet (6) MUST be installed in the position shown.
1
2
3
2
4
1
2
1
3
4
4
4
Slide cable pulley bracket (1) into rail assembly (3),
be sure to insert cable pulley bracket as shown.
Push cable pulley bracket toward front of rail and
slide inner trolley (2) into rail assembly.
Magnet (4) MUST be installed in position shown or
unit will not function properly.
Turn rail assembly over.
Slide outer trolley (1) into rail assembly (2), be sure the
end with door arm hole (3) is heading in direction of
door (4).
Slide outer trolley down rail until it engages with inner
trolley.
6
7
8
ATTACH TROLLEY TO RAIL
ASSEMBLE CABLE PULLEY BRACKET
INSERT CHAIN/CABLE INTO RAIL