15
OPERATION OF YOUR OPENER
Your opener can be activated by any of the following devices:
• The transmitter. Hold the push button down until the door starts to move.
• The backlit door control button (if you have installed this accessory). Hold the button down until door starts to
move.
• The outside keyswitch or keyless entry system (if you have installed either of these accessories).
Opening the door manually:
Door should be fully closed if possible. Weak or broken springs could allow an open door to fall rapidly.
Property
damage or serious personal injury could result.
The door can be opened manually by pulling the release handle down. To reconnect the doorpull the handle up and
toward the opener, the trolley will re-engage upon operation, activate the unit.
Do not use the manual release handle to pull the door open or closed.
When the opener is activated by transmitter or door control button:
1. If fully open, the door will close.
2. If closed, the door will open.
3. If opening or closing, the door will stop.
4. If partially open, the door will move in the opposite direction of last travel.
5. If an obstruction is encountered while closing, the door will reverse to the open position.
6. If an obstruction is encountered while opening, the door will reverse for 1 second.
7. The optional Protector System™ uses an invisible beam which, when broken by an obstruction, causes a closing
door to open and prevents an open door from closing. It is STRONGLY RECOMMENDED for homeowners with
young children.
Allow a 15 minute cooling period after 5 continuous operations of the opener.
The opener light will turn on:
1. when opener is initially plugged in;
2. when the power is interrupted;
3. when the opener is activated.
CARE OF YOUR OPENER
When properly installed, opener will provide high performance with a minimum of maintenance. The opener does not
require additional lubrication.
Limit and force adjustments:
These adjustments must be checked and properly set when opener is installed. Only a screwdriver is required to
adjust the limits. Weather conditions may cause some minor changes in the door operation, requiring some re-adjust
ments, particularly during the first year of operation. Refer to the limit and force adjustments sections 18 & 19 . Follow
the instructions carefully and
repeat the safety reverse test after any adjustment.
Transmitter:
Additional remotes can be purchased at any time for use in all vehicles using garage. Refer to accessories.The receiv
er must be programmed to operate with any new remote.
transmitter battery:
If transmission range decreases, replace battery.
To change battery:
Insert batteries positive side up. To replace cover, snap shut along both sides. Do not dispose of the old battery with
household waste. Take batteries to a proper disposal centre.
MAINTENANCE OF YOUR OPENER
Once a month :
• Repeat safety reverse test. Make any necessary adjustments.
• Manually operate door. If it is unbalanced or binding, call for professional garage door service.
• Check to be sure door opens and closes fully. Adjust limits and/or force if necessary.
Twice a year :
• Check chain tension. Disconnect trolley first. Adjust if necessary.
Once a year :
• Oil door roller, bearings and hinges. The opener does not require additional lubrication. Do not grease the door
tracks.
Содержание HE60ANZ
Страница 2: ......
Страница 20: ...114A3370D 18 2010 The Chamberlain Group Inc ...
