Holzstar 5902504, Инструкция по эксплуатации

Страница: 2 / 24

2 DKS 504 Vario | Version 1.03
Imprint
Product identification
JIG SAW Item Number
DKS 504 Vario 5902504
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Fax: 0049 (0) 951 96555 - 55
E-Mail: info@holzstar.de
Internet: www.holzstar.de
Information about the operating instructions
Original operating instructions
Published: 09.12.2019
Version:
1.03
Language: English
Author: FL
Copyright information
Copyright © 2019 Stürmer Maschinen GmbH, Hallstadt,
Germany.
Stürmer Maschinen GmbH is the sole owner of the con-
tent of these operating instructions.
Forwarding and reproduction of this document as well as
use and notification of its content is not permitted without
explicit consent. Infringements will lead to claims for da-
mages.
Subject to technical changes and errors.
Contents
1 Introduction ............................................. 3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Disclaimer ........................................................... 3
2 Safety ....................................................... 3
2.1 Legend of symbols.............................................. 3
2.2 Operator responsibility........................................ 4
2.3 Operating staff qualification ................................ 4
2.4 Personal protective equipment ........................... 5
2.5 Safety labels on the Jig Saw............................... 5
2.6 General safety aspects ....................................... 5
3 Intended Use............................................ 7
4 Technical Data......................................... 7
4.1 Table................................................................... 7
4.2 Type plate ........................................................... 8
5 Transport, packaging, storage............... 8
5.1 Transport ............................................................ 8
5.2 Packaging ........................................................... 8
5.3 Storage ............................................................... 8
6 Description of the machine .................... 8
6.1 Illustration ........................................................... 8
6.2 Scope of supply .................................................. 8
6.3 Strokes and saw blade selection ........................ 9
6.4 Optional accessories .......................................... 9
7 Installation ............................................... 9
7.1 Requirements for the place of installation........... 9
7.2 Setting up the JIG SAW...................................... 9
7.3 Selection of the correct saw blade.................... 10
7.4 Inserting Pinless Blades ................................... 10
7.5 Clamp the saw blade ........................................ 11
7.6 Tilt the saw table............................................... 11
7.7 Mount the saw blade guard and workpiece holder..... 11
7.8 Align saw blade and saw table ......................... 12
7.9 Setting the scale ............................................... 13
7.10 Electrical connection....................................... 13
8 Operation of the Jig Saw ..................... 13
8.1 Workflow ........................................................... 14
8.2 Carry out internal cuts....................................... 15
8.3 Cutting serveral workpieces.............................. 15
8.4 Connecting a separate tool............................... 15
8.5 Change the tools............................................... 16
8.6 Working with the hand tool ............................... 16
9 Care, maintenance and overhaul/repair... 16
9.1 Care after working ............................................ 17
9.2 Maintenance and repair .................................... 17
10 Troubleshooting.................................. 18
11 Disposal, recycling of used devices . 18
11.1 Decommissioning ........................................... 18
11.2 Disposal of electrical devices.......................... 18
11.3 Disposal of lubricants...................................... 19
11.4 Disposal via municipal collection points.......... 19
12 Spare parts .......................................... 19
12.1 Ordering spare parts....................................... 19
12.2 Spare parts drawing DKS 504 Vario............... 20
13 Electrical Wiring Diagram................... 21
14 EC-Declaration of Conformity............ 22